SCM OLIMPIC 500 HP EDGEBANDER
- stock number
500HP - new/used
New - year
- fob
Sanford, NC - electrical
220V, 3 Ph, 60 Cy - condition
NEW - qty
2
Share:
OUR PRICE
Inquire
Have questions?
Prefer to discuss
by phone or email?
We're here to help!
P: 919-776-8341
sales@jgmachinery.com
Description
GENERAL FEATURES:
- Automatic single-sided edge bander for the application and gluing of edges with hot melt glue on straight panels, on the four panel sides and the finishing and rounding-off of the panel corners.
- Main frame made of bended and welded steel plates. Highly stiff and vibration-free structure. Openings with shoots for the removal of chips to the floor that are not collected by the dust extraction.
- Top steel presser complete with two rows of rubber coated wheels mounted on bearings. Cover for wheel protection. Automatic lifting of presser from machine control.
- Panel infeed area consisting of a support table and lateral guide for a correct panel insertion.
- Light-signaling device positioned on the machine infeed side indicating the correct distance of panel insertion and the operating status of the machine, by different colors.
- Top working units fixed on the presser, while bottom working units fixed to the horizontal beam for a precise reference with respect to the panel.
- All frequency motors are equipped with inverter
- Equipped with Air Cushion Table at machine entry
TECHNICAL DATA:
- Feed speed: 12 m/min (39.3 FPM)
- 8 to 60 mm panel thickness
- 0.3 to 6 mm edgebanding thickness
- Panel distance – 600 mm (without rounding) 650 mm (with rounding)
- Minimum panel length: 140 mm
- Minimum coiled edge length: 180 mm
- Minimum strip length: 220 mm
WORKING UNITS:
- "AAR" Anti-adhesive unit to prevent glue stickingto the upper and lower panel surfaces
- "RT-V1" Pre-milling unit complete with (2) high frequency motors
- "VC-VM" Gluing unit carries out the automatic gluing of edges in coils and strips
- "SGP-E" Glue pot allows for quick changeover of the glue type and color. Anti-adherent treatment for both EVA and PUR glue
- Edge pressure unit consisting of one large powered with clutch roller and two idle rollers
- "K-2 Radius" End trimming unit consisting of two high frequency motors with automatic positioning for three cutting modes: straight, chamfered, and "radius"
- "R-HP Multiedge 1R" Top and bottom trimming unit with up to 20 degree tilting
- "Round 2-A Multiedge R1" Corner rounding unit carries out the rounding of straight or shaped angles and the chamfering of the upper and lower panel side
- "RAS-HP Multiedge 2R" Edge scraping unit to eliminate the presence of notches left from the tools during chamfering in the plastic edges
- "RC-N" Glue scraping unit to eliminate any excess glue in the joint
- "SP-V" Brushing unit for cleaning and polishing of the edge
HARDWARE and SOFTWARE:
- "Eye-S" Console with 15" color touchscreen display
- Communicates with the machine via the "Maestro Active Edge" human-machine interface
- Single-program processing that can be recalled from the archive manually or by barcode reader
- Reporting system: Maestro Active Edge can provide reports regarding production, alarms, events, and maintenance
- Diagnosis system that detects and displays alarms and warnings
- Full setup of machine from the controller
- "Maestro Connect" basic setup included
Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.
Connect with us